المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : pca programs full



medo_2006456
12-02-2009, 06:28 PM
بسم الله الرحمن الرحيم
كل الشكر للمهندس لحمد ابو هاشم رافع البرامج الاصلي
البرنامج علي اكتر من سيرفر
ندخل في البرامج
البرامج التي تم رفعها اصداراتها كالتالي:
PCA-mats 6.10 of size 14.69 MB
PCA-slab 2.00 of size 16.43MB
PCA-beam 2.00 of size 16.54MB
PCA-Column 3.64 of size 8.818 MB
PCA-wall 3.50 of size 45.35MB
وفي النهاية اتمني من الاخوة الاعضاء التفاعل مع الموضوع

pca mats

pcaMats analyzes foundation mats, combined footings, or slabs on grade. The slab is modeled as an assemblage of rectangular finite elements. The boundary conditions may be the underlying soil, nodal springs, piles, or translational and rotational nodal restraints. The model is analyzed under static loads that may consist of uniform (surface) and concentrated loads. The resulting deflections, soil pressure (or spring reactions), and bending moments are output. In addition, the program computes the required area of reinforcing steel in the slab
pcaMats uses the plate-bending theory and the Finite Element Method (FEM) to model the behavior of the mat or slab. The soil supporting the slab is assumed to behave as a set of one-way compression-only springs (Winkler foundation). If, during the analysis, a loading or the mat shape causes any uplift creating a spring in tension, the spring is automatically removed. The mat is re-analyzed without that or any other tension spring. The program automatically iterates until all tension springs are removed and the foundation stabilizes. The program also performs punching shear calculations around columns and piles












http://www.filefactory.com/file/afh56g8/n/PCA-mats_6_10_rar

http://www.zshare.net/download/155452763afa4366/#

http://rapidshare.com/files/196946025/PCA-mats_6.10.rar.html

***************************************

pca slab

pcaSlab is highly efficient in helping engineers analyze, design and investigate reinforced concrete floor systems. Like its predecessor ADOSS, pcaSlab now analyzes beams, one-way slab systems, two-way slab systems, and includes all the functionalities of pcaBeam.


This program incorporates torsion into shear design and investigation of beam systems. Shear capacity including torsion is represented in terms of required and provided area of transverse and longitudinal reinforcement.
Additional savings in both material and labor can be achieved using the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these regions.


pcaSlab supports ACI 318-05, ACI 318-02, ACI 318-99, and CSA.A 23.3-94 codes in both English and metric units.


Analysis and design tools in pcaSlab are provided for the following systems:
Simple and continuous beams
One-way slabs
Two-way flat plates
Two-way flat slabs (with drop panels)
One-way pan joist systems (Standard modules)
One-way skip joist systems (Wide modules)
Two-way joist systems (Waffle slabs)
pcaSlab enables the user to integrate up to 20 spans and two cantilevers of multiple floor system types in each model. Beyond new slab analysis and design, pcaSlab can perform strength investigation for evaluation and/or modifications to existing building slabs. The program promises to save users time crosschecking designs with applicable provisions of relevant design codes










http://www.filefactory.com/file/afh55f4/n/PCA_SLAB_V_2_00_rar

http://www.zshare.net/download/157498984f876b85/


http://rapidshare.com/files/196936839/PCA_SLAB_V._2.00.rar.html
***************************************
pca beam
pcaBeam Version is highly efficient in helping you analyze, design, and investigate beams and one-way slabs in reinforced concrete floor systems . pcaBeam is offered as a limited edition pcaSlab and features ACI 318-05 torsion effects in the shear design and investigation allowing engineers to achieve more economical cross sections where coupled shear and torsion occur. Additional savings in both material and labor can be achieved using the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these regions.


pcaBeam is a computer program for analysis, design, and investigation of reinforced concrete beams and one-way slab systems. Torsional effects and Moment redistribution can be considered. pcaBeam performs a complete design for flexure and shear and the resulting reinforcement schedules are output (including bar numbers, sizes, lengths, and spacings). pcaBeam offers a great deal of flexibility by allowing the user to modify the reinforcement configuration proposed by the program by switching from the Design to the Investigation option. Under the Investigation option, the longitudinal and transverse reinforcement capacities of the entire system are computed for a given reinforcement configuration. Output is presented in clear and organized tables and may also be viewed graphically. pcaBeam has a graphical interface that uses pull-down menus, dialog boxes, and icons to simplify the data input and clearly present the output.











http://www.filefactory.com/file/afh537h/n/PCA_BEAM_V_2_00_rar


http://www.zshare.net/download/157575216cde5d1c

http://rapidshare.com/files/196927365/PCA_BEAM_V._2.00.rar.html

***************************************
pca column
pcaColumn is a software program for the design and investigation of reinforced concrete sections subject to axial and flexural loads. The section can be rectangular, round or irregular, with any reinforcement layout or pattern. Slenderness effects can be considered. The program offers investigation of irregularly shaped, reinforced concrete column sections that may contain openings or boundary elements. Widely used for design of shear walls, bridge piers as well as typical framing elements in buildings, pcaColumn can investigate sections that are impossible to find on design charts or do by hand calculations. You can obtain the P-M interaction diagrams from both uniaxial and biaxial runs, as well as the Mx-My moment contour plots from biaxial runs for even the most irregular column and shearwall sections. Slenderness effects producing magnified moments may be included in the investigation


http://www.filefactory.com/file/afh52d2/n/PCA-Column3_64_rar


http://www.zshare.net/download/15051227f289107b/



***************************************










pca wall


pcaWall is a computer program for the design and analysis of reinforced concrete walls, tilt-up walls, and precast architectural and load-bearing panels. Design provisions are in accordance with ACI 318 and CSA A23.3 design standards. The wall may include any number of openings and stiffeners. The program is based on the finite element method and can take into account second-order effects. The amount of steel required for flexure is computed based on the selected design standard, and the user can specify one or two layers of reinforcement. The program also calculates the amount of steel required for shear and torsion in the stiffeners but does not calculate shear reinforcement in the wall elements.


pcaWall uses an advanced graphical interface that enables the user to easily generate complex wall models. The geometry of the wall (including any number of openings and stiffeners), the material properties, the loads (point, area, and line), and the support conditions are assigned graphically using the mouse. Also, springs (translational and rotational) can be graphically assigned at any node
pcaColumn program complements pcaWall by generating axial/flexure (P-M) diagrams suitable for shear wall design

http://www.filefactory.com/file/ff25ed/n/PCA_WALL_3_50_rar


***************************************







الموضوع منقول

amrsalah2
13-02-2009, 07:18 PM
جزاك الله خير

engineeratheer80
14-02-2009, 10:56 AM
شنو المشكلة اشو الروابط يطلع خطأ

سردار عزالدين علي
14-02-2009, 01:26 PM
شكرا جزيلا وبارك الله فيكم تم التحميل والنصب ولكنني لم اتمكن من تفعيل البرنامج وانما يعمل كديمو يرجى اعلامنا كيفية جعل البرنامج فعال .

medo_2006456
14-02-2009, 04:29 PM
جزاك الله خير
جزانا واياك اخي الكريم


شنو المشكلة اشو الروابط يطلع خطأ
الروابط كلها شغاله والحمد الله ارجو الاشاره الي الرابط الخطأ ان وجد


شكرا جزيلا وبارك الله فيكم تم التحميل والنصب ولكنني لم اتمكن من تفعيل البرنامج وانما يعمل كديمو يرجى اعلامنا كيفية جعل البرنامج فعال .

يا اخي في كل برنامج ملف كراك انسخ محتواه في مكان تنصيبك للبرنامج

Ali Al-Ani
19-02-2009, 05:40 PM
الف شكر على هذه البرامج
عندي طلب ممكن ترسل لي رابط الموقع الذي حصلت منه على هذه البرامج
والف شكر مرة أخرى

eng_ama2005
20-02-2009, 12:10 AM
جزاك الله خيرا اخي ميدو

tmnaji
21-02-2009, 10:38 AM
جزاك الله خير

muhammad-s-k
21-02-2009, 02:45 PM
جزاكم الله خيراً

RESEARCHER
21-02-2009, 04:23 PM
جزاكم الله خيراً

muh2006
06-03-2009, 11:42 PM
I will not upload the new versions, and let Mr. Hashim the origional uploader do it for you.
By the way check who was origionally upload the software with cracks 3 years ago?

medo_2006456
07-03-2009, 11:48 PM
I will not upload the new versions, and let Mr. Hashim the origional uploader do it for you.
By the way check who was origionally upload the software with cracks 3 years ago?


no one ask you to upload any versions
be patient and dont be angry
thanks any way

A1957
08-03-2009, 12:00 PM
جزاك الله خيرا على جهدك الطيب والقيم

tj1987
28-06-2009, 12:08 AM
thx for the programs but the pcawall doesn;t work as a full version, i copy the files in the installation directory and i use the patch, the program run but it has a trial period, please try to tell me what;s the problem SHOKRAN YA AKHI

ABDULHAKIMALSAMIL
28-02-2010, 10:23 AM
مشكورررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررررر ررررررررررر
pcawall التفعيل له 15 يوم

abdd
06-03-2010, 09:21 PM
جزاكم الله خيرا...جاري التحميل

maaljahu
09-04-2010, 05:27 PM
The link for PCA Slab is not working. Can You activate it Please
Thanks

qazz
01-05-2010, 01:24 PM
بارك الله فيك على المجهود